Examinar Artículos por departamento (eus.) "Meatze eta metalurgia ingeniaritza materialen zientzia"
Now showing items 21-40 of 91
-
Cytotoxicity and Inflammatory Effects of Chitin Nanofibrils Isolated from Fungi
(ACS, 2023-12)Fungal nanochitin can assist the transition from the linear fossil-based economy to a circular biobased economy given its environmental benefits over conventional crustacean-nanochitin. Its real-world implementation requires ... -
Delamination Fracture Behavior of Unidirectional Carbon Reinforced Composites Applied to Wind Turbine Blades
(MDPI, 2021-01-27)One of the materials that is used widely for wind turbine blade manufacturing are fiber-reinforced composites. Although glass fiber reinforcement is the most used in wind turbine blades, the use of carbon fiber allows ... -
Development of a Sentinel-2 burned area algorithm: Generation of a small fire database for sub-Saharan Africa
(Elsevier, 2019-03-01)A locally-adapted multitemporal two-phase burned area (BA) algorithm has been developed using as inputs Sentinel-2 MSI reflectance measurements in the short and near infrared wavebands plus the active fires detected by ... -
Development of Magnetically Active Scaffolds for Bone Regeneration
(MDPI, 2018-09)This work reports on the synthesis, with the thermally induced phase separation (TIPS) technique, of poly (l-lactide) (PLLA) scaffolds containing Fe-doped hydroxyapatite (FeHA) particles for bone regeneration. Magnetization ... -
Documentación de las intervenciones de conservación restauración del patrimonio arquitectónico: perspectiva histórica, situación actual y tendencias de futuro
(Grupo Español GE-IIC, 2023-07-31)La documentación de las intervenciones de conservación-restauración del patrimonio engloba los procesos metodológicos y los registros generados antes, durante y después de las mismas, influyendo en la preservación del ... -
Educating Future Agricultural Engineers at the University of Burgos, Spain, through a Service-Learning Project on Rural Depopulation and Its Social Consequences
(MDPI, 2023-03-02)A Service-Learning Project (S-LP) is a teaching experience through which the concepts covered during an educational course can practically be applied to address a given social problem. It is therefore a useful teaching ... -
Effect of powder particle size distribution on the surface finish of components manufactured by laser powder bed fusion
(Springer, 2023)One of the key aspects of the laser powder bed fusion (L-PBF) process is the quality of the raw powder since it affects the final properties of the manufactured parts. In this study, 13 batches of Inconel (R) 718 powder ... -
Electrical Percolation in Extrinsically Conducting, Poly(εpsilon-Decalactone) Composite Neural Interface Materials
(Nature, 2021-01-14)By providing a bidirectional communication channel between neural tissues and a biomedical device, it is envisaged that neural interfaces will be fundamental in the future diagnosis and treatment of neurological disorders. ... -
Evaluating Efficacy of Antimicrobial and Antifouling Materials for Urinary Tract Medical Devices: Challenges and Recommendations
(WILEY-VCH, 2019-05)In Europe, the mean incidence of urinary tract infections in intensive care units is 1.1 per 1000 patient-days. Of these cases, catheter-associated urinary tract infections (CAUTI) account for 98%. In total, CAUTI in ... -
Evaluation of Protective Coatings for High-Corrosivity Category Atmospheres in Offshore Applications
(MDPI, 2019-04-23)The interest in renewable energies obtained from the resources availed in the ocean has increased during the last few years. However, the harsh atmospheric conditions in marine environments is a major drawback in the design ... -
Evolution of Microstructure during Isothermal Treatments of a Duplex-Austenitic 0.66C11.4Mn.9.9Al Low-Density Forging Steel and Effect on the Mechanical Properties
(MDPI, 2021-01-26)In the last decades, low-density steels for forging have increasing interest in the automotive industry, and good mechanical properties are required for their real application. This paper describes the results obtained for ... -
Experimental and numerical modeling of basalt textile reinforced mortar behavior under uniaxial tensile stress
(Elsevier, 2014-03-01)During the last years several projects and studies have improved the knowledge about textile reinforced mortar (TRM) technology. TRM has already been used in strengthening masonry and reinforced concrete structural elements ... -
Exploiting the layer-by-layer nanoarchitectonics for the fabrication of polymer capsules: A toolbox to provide multifunctional properties to target complex pathologies
(Elsevier, 2022-04)[EN] Polymer capsules fabricated via the layer-by-layer (LbL) approach have attracted a great deal of attention for biomedical applications thanks to their tunable architecture. Compared to alternative methods, in which ... -
Feasibility of Vermicomposting of Spent Coffee Grounds and Silverskin from Coffee Industries: A Laboratory Study
(MDPI, 2020-08-03)In the coffee industry, several by-products are generated during the production and consumption of coffee and represent an important waste from an environmental viewpoint. For improving the knowledge about this issue, a ... -
Homotypic targeting and drug delivery in glioblastoma cells through cell membrane-coated boron nitride nanotubes
(Elsevier, 2020-07)Glioblastoma multiforme (GBM) is one of the most aggressive types of brain cancer, characterized by rapid progression, resistance to treatments, and low survival rates; the development of a targeted treatment for this ... -
Hydrolytic degradation and cytotoxicity of poly(lactic-co-glycolic acid)/multiwalled carbon nanotubes for bone regeneration
(Wiley, 2019-08-27)Biodegradable poly(l-lactide-co-glycolide) (PLGA)/multiwalled carbon nanotubes (MWCNTs) scaffolds produced by thermally induced phase separation (TIPS) are studied for bone regeneration. Their magnetic properties, cytotoxicity, ... -
In Vitro Degradation of Poly(caprolactone)/nHA Composites
(Hindawi Publishing, 2014)The degradation behavior and mechanical properties of polycaprolactone/nanohydroxyapatite composite scaffolds are studied in phosphate buffered solution (PBS), at 37 degrees C, over 16 weeks. Under scanning electron ... -
Influence of Minor Alloying Element Additions on the Crack Susceptibility of a Nickel Based Superalloy Manufactured by LPBF
(MDPI, 2021-09-30)Inconel 738LC (IN738LC) is a nickel-based superalloy specially used in the hot section components of turbine engines. One of its main drawbacks relies on the cracking susceptibility when it is manufactured by laser powder ... -
Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles
(Springer, 2022-09)In this work, two medium Mn steels (5.8 and 5.7 wt pct Mn) were subjected to a quenching and partitioning (Q&P) treatment employing a partitioning temperature which corresponded to the start of austenite reverse transformation ... -
Influence of rGO on the Crystallization Kinetics, Cytoxicity, and Electrical and Mechanical Properties of Poly (L-lactide-co-ε-caprolactone) Scaffolds
(MDPI, 2022-10-23)Biodegradable scaffolds of poly (L-lactide-co-ε-caprolactone) (PLCL) and reduced graphene oxide (rGO) were prepared by TIPS (thermally induced phase separation). The nonisothermal cold crystallization kinetics were ...