Search
Now showing items 1-10 of 12
Confined Crystallization of Polymers within Nanopores
(ACS, 2021-08-03)
Crystallization of polymeric materials under nanoscopic confinement is highly relevant for nanotechnology applications. When a polymer is confined within rigid nanoporous anodic aluminum oxide (AAO) templates, the ...
Crystallization Kinetics and Nanoparticle Ordering in Semicrystalline Polymer Nanocomposites
(Elsevier, 2022-03-13)
There has been considerable interest in the nucleation and crystallization of polymers in the presence of nanoparticles (NPs, or nanofillers in general, NFs). Most of the extensive work in this area has focused on anisotropic, ...
Using Successive Self-nucleation and Annealing (SSA) to detect the solid-solid transitions in poly (hexamethylene carbonate) and poly (octamethylene carbonate)
(ACS, 2021-10-26)
Solid-solid transitions in poly (hexamethylene carbonate) (PC6) and poly (octamethylene carbonate) (PC8), denoted δ to α transition, have been investigated, using self-nucleation and Successive Self-nucleation and Annealing ...
The effect of initial molecular weight on the structural evolution of Polyamide 1012 during high-temperature thermal treatments as revealed by Successive Self-Nucleation and Annealing
(ACS, 2022-08-24)
Successive self-nucleation and annealing (SSA) can thermally fractionate semi-crystalline polymers, thus detecting the characteristic structural features that lead to specific melting point distributions (corresponding to ...
Composition Dependent Miscibility in the Crystalline State of Polyamide 6 /Polyamide 4,10 Blends: from Single to Double Crystalline Blends
(Elsevier, 2021-02-22)
In this work, we studied the composition-dependent miscibility of polyamide 6 and biobased polyamide 4,10 (PA6/PA410) blends, as triggered by crystallization driven phase segregation. The blends were prepared by extrusion ...
Fractionated crystallization in semicrystalline polymers
(Elsevier, 2021-02-16)
The crystallization of heterogeneously nucleated bulk polymers typically occurs in a single exothermic process, within a narrow temperature range, i.e., a single exothermic peak is detected by Differential Scanning Calorimetry ...
Biodegradable binary blends of poly (butylene succinate) or poly (ε-caprolactone) with poly (butylene succinate-ran-ε-caprolactone) copolymers: Crystallization behavior
(Elsevier, 2022-08-12)
Poly (butylene succinate) (PBS) and polycaprolactone (PCL) are two immiscible biocompatible and biodegradable polymers. Aiming to combine the properties of these biodegradable polymers, this work explores for the first ...
Solid–Solid Crystal Transitions (δ to α) in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)
(ACS, 2021-07-21)
Poly (hexamethylene carbonate) (PC6) and poly (octamethylene carbonate) (PC8) were studied under different crystallization conditions. Using differential scanning calorimetry (DSC), a new solid-solid transition, denoted α ...
Unexpected structural properties in the saturation region of the odd-even effects in aliphatic polyethers: Influence of crystallization conditions
(ACS, 2022-01-04)
A series of aliphatic polyethers with different chain lengths (nCH2= 6 to 12, and 16) is
studied employing differential scanning calorimetry and X-rays scattering. The
calorimetric and structural behavior of samples ...
Competition between Chain Extension and Crosslinking in Polyamide 1012 during High Temperature Thermal Treatments as Revealed by SSA Fractionation
(ACS, 2021-08-03)
Self-nucleation and annealing (SSA) is an efficient way to thermally fractionate semi-crystalline polymers. The thermal fractions produced by SSA have distinct melting points that correspond to different average lamellar ...