Search
Now showing items 61-70 of 72
Analysis of the regimes in the scanner-based laser hardening process
(Elsevier, 2016-10-10)
Laser hardening is becoming a consolidated process in different industrial sectors such as the automotive industry or in the die and mold industry. The key to ensure the success in this process is to control the surface ...
On the relationship between cutting forces and anisotropy features in the milling of LPBF Inconel 718 for near net shape parts
(Elsevier, 2021-11)
The versatility and potential applications of additive manufacturing have accelerated the development of additive/subtractive hybrid manufacturing methods. LPBF processes are exceptionally efficient at producing complex-shaped, ...
Drilling of CFRP-Ti6Al4V stacks using CO2-cryogenic cooling
(Elsevier, 2021-04)
In the work here presented, liquefied CO2 is used as cutting fluid for drilling CFRP-Ti6Al4V stacks as alternative to dry-drilling. Several tests were performed using dry-drilling technique, to compare this with the ...
Tool wear monitoring of high-speed broaching process with carbide tools to reduce production errors
(Elsevier, 2022-06)
Real-time monitoring in CNC machine tools is focused on the early detection of tool wear, and in this way to assess part piece quality. The machining process known as broaching is critical for firtree slots (dovetails) ...
In pursuit of sustainable cutting fluid strategy for machining Ti-6Al-4V using life cycle analysis
(Elsevier, 2021-09)
The need for developing sustainable manufacturing processes which should have a good balance between economic viability and environmental protection is one of the key challenges against manufacturers. The conventional ...
Stiffening near-net-shape functional parts of Inconel 718 LPBF considering material anisotropy and subsequent machining issues
(Elsevier, 2021-12-24)
[EN] Additive manufacturing of metallic parts has witnessed significant development. The laser powder bed fusion (LPBF) process has emerged as a key process for manufacturing thin-walled components. However, despite the ...
In-Process Machining Distortion Prediction Method Based on Bulk Residual Stresses Estimation from Reduced Layer Removal
(MDPI, 2024-01-03)
Manufacturing structural monolithic components for the aerospace market often involves machining distortion, which entails high costs and material and energy waste in industry. Despite the development of distortion calculation ...
Fatigue Life Estimation Model of Repaired Components with the Expanded Stop-Hole Technique
(MDPI, 2024-02-01)
Fatigue crack growth tests are conducted to assess the efficacy of the stop-hole crack repair method. This straightforward and widely adopted technique involves drilling a hole at the crack tip and subsequently enlarging ...
Failure-Analysis Based Redesign of Furnace Conveyor System Components: A Case Study
(MDPI, 2019-08)
Any manufacturing equipment designed from scratch requires a detailed follow-up of the performance for the first units placed in service during the production ramp-up, so that lessons learned are immediately implemented ...
Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L
(Elsevier, 2024-05)
The present work investigates the performance of TiAlSiVN coating with 5 and 11 at% of V concentration deposited on the Al2O3/SiC cutting tools during dry turning of austenitic 316 L stainless steel. The maximum flank wear ...