Bilatu
378-tik 61-70 emaitza erakusten
Influence of Elastomer Layers in the Quality of Aluminum Parts on Finishing Operations
(MDPI, 2020-02-22)
In finishing processes, the quality of aluminum parts is mostly influenced by static and dynamic phenomena. Different solutions have been studied toward a stable milling process attainment. However, the improvements obtained ...
Fatigue improvement and residual stress relaxation of shot-peened alloy steel DIN 34CrNiMo6 under axial loading
(Elsevier, 2022-09)
Shot-peening treatment was applied to a quenched and tempered DIN 34CrNiMo6 steel to improve its high-cycle R: -1 axial fatigue strength. Compared with the machined condition, the increase in the fatigue limit was 21.8%. ...
Translational parallel manipulator with Pa2 kinematic joints
(Springer, 2016-10-01)
The kinematic pair Pa2 is composed of two interlinked parallelograms. It has two degrees of freedom that generate a translational plane variable with position. It has a structure different from the PaPa pair, which is ...
Multi-Criteria Decision-Making Method for Sustainable Energy-Saving Retrofit Façade Solutions
(MDPI, 2021-11-27)
The increasing energy consumption levels of buildings within Europe call for controlled consumption and improvements to energy savings and efficiency and effective energy efficiency regulations. However, many aging and ...
Virtual Sensor for Kinematic Estimation of Flexible Links in Parallel Robots
(MDPI, 2017-09)
The control of flexible link parallel manipulators is still an open area of research, endpoint trajectory tracking being one of the main challenges in this type of robot. The flexibility and deformations of the limbs make ...
Hybrid manufacturing of complex components: Full methodology including laser metal deposition (LMD) module development, cladding geometry estimation and case study validation
(Elsevier, 2022-11)
To optimize and satisfy current industrial requirements, during the last decade new alternatives to conventional manufacturing processes are implemented into conventional machines, leading to multitasking machines. Especially ...
High-Temperature Mechanical Properties of IN718 Alloy: Comparison of Additive Manufactured and Wrought Samples
(MDPI, 2020-08-09)
Wire Arc Additive Manufacturing (WAAM) is one of the most appropriate additive manufacturing techniques for producing large-scale metal components with a high deposition rate and low cost. Recently, the manufacture of ...
Mechatronic Model of a Compliant 3PRS Parallel Manipulator
(MDPI, 2021-12-28)
Compliant mechanisms are widely used for instrumentation and measuring devices for their precision and high bandwidth. In this paper, the mechatronic model of a compliant 3PRS parallel manipulator is developed, integrating ...
Optimization of the 2PRU-1PRS Parallel Manipulator Based on Workspace and Power Consumption Criteria
(MDPI, 2021-08-24)
In the last few years, parallel manipulators are being increasingly studied and used for different applications. The performance of parallel manipulators is very sensitive to the geometric parameters, so it is essential ...
Study of the Influence of Shielding Gases on Laser Metal Deposition of Inconel 718 Superalloy
(MDPI, 2018-08)
The use of the Laser Metal Deposition (LMD) technology as a manufacturing and repairing technique in industrial sectors like the die and mold and aerospace is increasing within the last decades. Research carried out in the ...