Search
Now showing items 11-20 of 23
On the Cutting Performance of Segmented Diamond Blades when Dry-Cutting Concrete
(MDPI, 2018-02-09)
The objective of the present study is to analyze and compare the cutting performance of segmented diamond blades when dry-cutting concrete. A cutting criteria is proposed to characterize the wear of the blades by measuring ...
Short-Cut Method to Assess a Gross Available Energy in a Medium-Load Screw Friction Press
(MDPI, 2018-03)
The present study proposed a rapid method, based on a previous universal compression tests, to estimate the required load capacity to cold forge different specimen quantity in a screw press. Accordingly, experimental and ...
A reliable turning process by the early use of a deep simulation model at several manufacturing stages
(MDPI, 2017-05-02)
The future of machine tools will be dominated by highly flexible and interconnected systems, in order to achieve the required productivity, accuracy, and reliability. Nowadays, distortion and vibration problems are easily ...
Advanced Manufacturing Centres, Practical Model to Boost Technology Transfer in Manufacturing
(MDPI, 2019-09)
Establishing collaboration strategies with interdisciplinary networks in research is a crucial success factor for the companies in any sector, especially in manufacturing for aeronautics. In the aeronautical supply chain, ...
Drilling Process in γ-TiAl Intermetallic Alloys
(MDPI, 2018-11-26)
Gamma titanium aluminides (gamma-TiAl) present an excellent behavior under high temperature conditions, being a feasible alternative to nickel-based superalloy components in the aeroengine sector. However, considered as a ...
Prediction Methods and Experimental Techniques for Chatter Avoidance in Turning Systems: A Review
(MDPI, 2019-11)
The general trend towards lightweight components and stronger but difficult to machine materials leads to a higher probability of vibrations in machining systems. Amongst them, chatter vibrations are an old enemy for ...
Hole Making by Electrical Discharge Machining (EDM) of -TiAl Intermetallic Alloys
(MDPI, 2018-07)
Due to their excellent strength-to-weight ratio and corrosion and wear resistance, gamma-TiAl alloys are selected for aerospace and automotive applications. Since these materials are difficult to cut and machine by ...
Improving Stability Prediction in Peripheral Milling of Al7075T6
(MDPI, 2018-08)
Chatter is an old enemy to machinists but, even today, is far from being defeated. Current requirements around aerospace components call for stronger and thinner workpieces which are more prone to vibrations. This study ...
Sensitivity Analysis of Tool Wear in Drilling of Titanium Aluminides
(MDPI, 2019-03-06)
In the aerospace industry, a large number of holes need to be drilled to mechanically connect the components of aircraft engines. The working conditions for such components demand a good response of their mechanical ...
Super Abrasive Machining of Integral Rotary Components Using Grinding Flank Tools
(MDPI, 2018-01-01)
Manufacturing techniques that are applied to turbomachinery components represent a challenge in the aeronautic sector. These components require high resistant super-alloys in order to satisfy the extreme working conditions ...