Show simple item record

dc.contributor.authorGodino Fernández, Leire
dc.contributor.authorPombo Rodilla, Iñigo
dc.contributor.authorGirardot, Jérémie
dc.contributor.authorSánchez Galíndez, José Antonio ORCID
dc.contributor.authorIordanoff, Ivan
dc.date.accessioned2024-02-08T09:36:59Z
dc.date.available2024-02-08T09:36:59Z
dc.date.issued2019-10-17
dc.identifier.citationJournal of Materials Processing Technology 277 : (2020) // Article ID 116464es_ES
dc.identifier.issn0924-0136
dc.identifier.issn1873-4774
dc.identifier.urihttp://hdl.handle.net/10810/65058
dc.description.abstractThe grinding process is continuously adapting to industrial requirements. New advanced materials have beendeveloped, which have been ground. In this regard, new abrasive grains have emerged to respond to the demands of industry to reach the optimum combination of abrasive-workpiece material, which allows for both the minimization of wheel wear and increased tool life. To this end—and following previous experimental works— the present study models in 3D the wear behavior of Sol-Gel alumina abrasive grain using Discrete Element Methods. It is established that the alumina behaves as a ductile material upon contact due to the effect of high temperature and pressure. This model reproduces the third body generation in the contact, taking into account the tribochemical nature of the wear flat, which is the most harmful type of wear in the grinding process. The evolution of the wear during a complete contact is analyzed, revealing similarities in the wear of white fused alumina (WFA) and Sol-Gel (SG) alumina. However, the SG abrasive grain suffers less wear than the WFA under the same contact conditions. The proposed wear model can be applied to any abrasive-workpiece combination.es_ES
dc.description.sponsorshipThe authors gratefully acknowledge the funding support received from the Spanish Ministry of Economy and Competitiveness and European Regional Development Fund (ERDF) operation program for funding the project “Scientific models and machine-tool advanced sensing techniques for efficient machining of precision components of Low Pressure Turbines” (DPI2017-82239-P). Funding support was also received from the contracting call for the training of research staff in UPV/EHU, of Vice-rectorate of research, to develop this project.es_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.relationinfo:eu-repo/grantAgreement/MINECO/DPI2017-82239-P
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectgrindinges_ES
dc.subjectabrasive grains
dc.subjectwear model
dc.subjectDEM
dc.subjectalumina
dc.subjectSG
dc.titleModelling the wear evolution of a single alumina abrasive grain: analyzing the influence of crystalline structurees_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.rights.holder© 2019 Elsevier under CC BY-NC-ND license
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/pii/S0924013619304376
dc.identifier.doi10.1016/j.jmatprotec.2019.116464
dc.departamentoesIngeniería mecánicaes_ES
dc.departamentoeuIngeniaritza mekanikoaes_ES


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

© 2019 Elsevier under CC BY-NC-ND license
Except where otherwise noted, this item's license is described as © 2019 Elsevier under CC BY-NC-ND license